NSWsales@airfoil.com.au

NSW(02) 9601 1066

QLDsalesqld@airfoil.com.au

QLD(07) 3277 1066

VICsalesvic@airfoil.com.au

VIC(03) 9558 1766

Barry Davey joins Airfoil

Airfoil is excited to announce that Barry Davey joins us as Victorian Sales Manager. He joins Steven Gagliardini in the newly formed branch in Dingley Village Melbourne servicing the whole of Victoria.

Barry has had a long career in air diffusion. He started in 1978 for Ellis Air conditioning as an apprentice and rose to be the Victorian State Manager for Air Grilles for 21 years. During that time, he has been involved in the design and supply of Air Distribution products for many iconic buildings around Melbourne, these include:

  • 1 Spring St
  • Melbourne Museum
  • Treasury Building
  • 101 Collins St
  • ANZ 530 Collins St
  • Melbourne Airport Tullamarine
  • Rod Laver Arena
  • ANZ Global HQ Docklands
  • Melbourne Exhibition and Convention Centre

Barry will provide support for sales to all the consulting engineers and mechanical contractors across Victoria. The branch is a local ‘one stop shop’ supplying Airfoil’s vast range of locally manufactured air diffusion products as well as a distributor for the internationally renowned brand TROX.

If you have inquiries, please contact Barry Davey on 0418 456 070 or email; barry@airfoil.com.au.

Comments Off on Barry Davey joins Airfoil News

Read more

Victorian Branch Now Open

Airfoil is excited to announce that we have opened a branch in Dingley Village, Melbourne, Victoria. The branch is a local ‘one stop shop’ supplying Airfoil’s vast range of locally manufactured air diffusion products as well as a distributor for the internationally renowned brand TROX.

Over 70 years of Experience and Knowledge

The Victorian branch is spearheaded by two very experienced professionals in the air diffusion industry with over 70 years of combined know-how; Steven Gagliardini is the General Manager and Head of TROX/Airfoil and Barry Davey is the Victorian Sales Manager.

Steven Gagliardini_1200

Steven Gagliardini will provide support for technical and product design selection for consulting engineers, mechanical contractors and architects across Victoria.

Steven has forty years’ experience in the air conditioning sector of the building services industry in Australia and in South Africa. As Technical Director for TROX Australia, Steven provided design proposals and product selections for project specific applications in consultation with distributors, consulting engineers and contractors. Over the last two years alone, he advised and made selections on over 250 projects.

As Head of TROX/Airfoil, Steven will provide design proposals and product selections for the TROX and Airfoil product ranges in Victoria, but also across Australia.

Barry Davey_name

Barry will provide support for sales to consulting engineers and mechanical contractors across Victoria. Many of you will know Barry from his long held position as the Victorian State Manager for Air Grilles. He’s been involved in the design and supply of Air Distribution products for many iconic buildings around Melbourne, these include: Melbourne Museum, Treasury Building, Melbourne Airport Tullamarine, Rod Laver Arena, MCG Redevelopment, ANZ Global HQ Docklands, Melbourne Exhibition and Convention Centre.

Barry will be happy to take you through Airfoils product range, custom manufacturing options and our vision for servicing Victoria.

duct-stock_website

Redefine levels of service for the industry

Airfoil’s vision is to redefine the service levels for the Australian air diffusion industry. We want our customers to have access to our products as soon as possible after ordering, therefore, we hold all standard products in stock. This enables lead times to be cut, delivery schedules to be secure and customers to have peace of mind.

airfoil-factory_wide_website

Cut Lead Times on Custom Manufactured Items

We have the best lead times for custom manufactured items in the industry: 7-10 days. Airfoil prides itself on living up to our motto “Making it happen sooner” and as a market leader, we have never turned down a challenging job. We look for quality solutions that will fit into the timeframe and budget. There is no job too small or too big. We have recently expanded the factory complex at Moorebank Sydney to 8,000 square metres and have invested in our own transport logistics to make sure products are delivered on time.

Airfoil-truck-1200

Secure Delivery Pipeline

We are the only manufacturer in the sector to have Quality Assured Systems. This provides us with the framework to deliver a consistent product across the board. Any mistakes are logged and corrected. An internal audit is performed monthly and an official audit by SAI Global every six months. You can have confidence that we are continually improving our manufacturing processes to provide you with better service.

Peace of Mind

For your next order contact Barry Davey or Steven Gagliardini on 03 9558 1766 or email salesvic@airfoil.com.au. You can always visit us at the new our branch located at Unit 3, 310  Boundary Rd,  Dingley Village VIC 3172. Entrance on Redwood Drive.

Comments Off on Victorian Branch Now Open News

Read more

Airfoil is the Home of TROX

OVER 20,000 TROX PRODUCTS IN STOCK.

Airfoil’s vision is to redefine the service levels for the Australian air diffusion industry in 2017. We want our customers to have access to our products as soon as possible after ordering, therefore, we keep 80,000 of Airfoil’s standard products in stock at all times. We’ve now added 20,000 standard products from the TROX range. This enables us to slash lead times, secure delivery schedules and give customers peace of mind when ordering from all of our standard product range.

Carrying TROX box

Slash Lead Times on TROX Products

When Airfoil took over the primary distributorship of TROX products in May 2016, the lead time for any TROX standard product was 12 weeks, sometimes longer. Airfoil prides itself on living up to our motto “Making it happen sooner” and as a market leader, we look for ways to make our customers life easier and more productive. It just made sense that Airfoil should stock standard TROX products for our customers. Now we can immediately deliver the standard products from our specially build storage facility in our Sydney Factory Complex. So now the lead time on TROX standard products is slashed to 5 to 7 days. No more waiting, no more worrying about shipments. Just order and they will arrive on time.

Airfoil’s Managing Director, Adam Carney met with TROX CEO, Chairman and President of TROX Asia and Pacific Operations (APO) Pieter Jooste at the Airfoil factory complex in Sydney to discuss the strategy and partnership in August 2016.

Group shot_website

(photo from right, Jeremy Irving (Airfoil National Business Development Manager, Robert Johnstone Airfoil General Manager Queensland, Tony Wood-Collier (Director Business Development TROX Australia) Steve Mifsud (Airfoil General Manager Australia) Adam Carney (Airfoil Managing Director), Pieter Jooste (TROX CEO, Chairman and President of TROX Asia and Pacific Operations)

TRUCK_1200

Secure Delivery Pipeline

We are the only manufacturer and distributor in the sector to have Quality Assured Systems. This provides us with the framework to deliver the best service in the industry. Any mistakes are logged and corrected. An internal audit is performed monthly and an official audit by SAI Global every six months. You can have confidence that we are continually improving our processes to provide you with better service.

Steven Gagliardini_1200

Peace of Mind

In 2016 Airfoil Manufacturing celebrates its 40th year of business as Australia’s leading manufacturer of air diffusion products. With the TROX product range, Airfoil has the widest range of air diffusion products available under one roof in Australia. We have supported this expansion in products with investment in people with the right knowledge to assist you.

Steven Gagliardini joins us as Victorian General Manager and Head of TROX/Airfoil. He leads the newly formed branch in Dingley Village Melbourne servicing the whole of Victoria. In his recent six-year term with TROX Australia as Technical Director, Steven provided design proposals and TROX product selections for project specific applications. Over the last two years he’s advised and made selections on over 250 projects in consultation with distributors, consulting engineers and contractors.

As Head of TROX/Airfoil, Steven will continue to use his specialist knowledge, experience and passion for air diffusion to provide design proposals and TROX/Airfoil product selections for project specific applications in Victoria, but also across Australia.

 

Featured Products in Stock

Banner_VAV box_1200TROX VARYCONTROL Type TVB-SSP is a pressure independent Variable Air Volume (VAV) terminal unit. It’s widely used for volume flow control of supply air in VAV systems with high level of technical and acoustical requirements. It can be supplied with electric heater and hot water coil and fabricated/tested with any free-issued controller. What gives TROX VAV Boxes the advantage is that they are tested and calibrated in the factory, not at the commission stage. This saves time and reduces the cost of installation.

Banner_Swirl Diffuser_1200

TROX Swirl diffuser type TCS is supplied with either circular or square face plate. The TCS offers high volume flow rate at low sound power levels. Due to the horizontal swirl-type discharge of the supply air, induction of room air occurs very quickly, resulting in a rapid decay of supply air velocity and temperature differential. A high level of comfort is acheived. The type TCS can be used for either supply or extract air application, suitable for both constant and variable volume flow systems.

Banner_Slot Diffuser_1200

The VSD35 is TROX’s adjustable slot diffuser with aesthetically designed face sections. The diffusers face is a one piece extrusion so there are no visible joints. The low overall height means that the slot diffusers are particularly suitable for use in restricted ceiling voids and in suspended ceiling systems. The VSD35 type slot diffuser is characterised by high induction that results in a rapid decay in supply air temperature differential and air discharge velocity.

The Complete Package

Airfoil provides a ‘one stop shop’ for all your air diffusion products. We stock over 100,000 standard products in the Airfoil and TROX ranges. TROX lead times on standard products have been slashed from 12 weeks to 5 to 7 days. This immediate supply chain is supported by the fastest turn a round times for custom manufacturing in the industry. We welcome you to contact us to discuss your next order.

Comments Off on Airfoil is the Home of TROX News

Read more

Airfoil Sponsors Crest Golf Day

Airfoil was delighted to once again to be a major sponsor of the Crest Charity Golf Day at the Riverside Oaks Golf Course on the 4th November 2016. Airfoil sponsored two holes on the day, the $50,000 ‘hole in one’ and a new car ‘hole in one’. The Airfoil team in the photo above at the $50,000 hole in one (from left) Kevin Hadfield, Dave Henderson, Adam Carney and Crest MD Andrew Johnson.

All the money raised went to Anglicare. https://www.anglicare.org.au/

anglicare-logo

Anglicare reaches out with care that meets need of the marginalised and socially excluded through services and advocacy. Airfoil is proud to be associated with such a respected and valuable charity.

airfoil-car-hole-in-one
“It was a great day and it’s a pleasure to be involved with a fun charity event like the Crest Golf Day. I’d like to thank Crest for organising it, specifically Andrew Johnson, Mark Hopping and Natalie Singh.”

Adam Carney Airfoil, MD

Comments Off on Airfoil Sponsors Crest Golf Day News

Read more

Queensland Branch Now Open

Airfoil is excited to announce that we have opened a branch in Rocklea, Queensland. The branch will service customers in Queensland, but also across the Northern Territory and Western Australia.

Redefine levels of service for the industry

Airfoil’s vision is to redefine the service levels for the Australian air diffusion industry. We want our customers to have access to our products as soon as possible after ordering, therefore, we hold all standard products in stock. This enables lead times to be cut, delivery schedules to be secure and customers to have peace of mind.

Cut Lead Times on Custom Manufactured Items

We have the best lead times for custom manufactured items in the industry: 7-10 days. Airfoil prides itself on living up to our motto “Making it happen sooner” and as a market leader, we have never turned down a challenging job. We look for quality solutions that will fit into the timeframe and budget. There is no job too small or too big. We have recently expanded the factory complex at Moorebank Sydney to 8,000 square metres and have invested in our own transport logistics to make sure products are delivered on time.

airfoil-factory_wide_website

Secure Delivery Pipeline

We are the only manufacturer in the sector to have Quality Assured Systems. This provides us with the framework to deliver a consistent product across the board. Any mistakes are logged and corrected. An internal audit is performed monthly and an official audit by SAI Global every six months. You can have confidence that we are continually improving our manufacturing processes to provide you with better service.

truck_qld_website

Peace of Mind

The Queensland branch is staffed by three very experienced professionals in the air diffusion industry with over 40 years of combined know-how; Rob Johnstone (General Manager), Jeremy Irving (National Business Development Manager) and Andrew Gray (Sales Manager). Rob Johnstone has been with Airfoil for nearly 20 years and knows Airfoil products inside out. Jeremy Irving has been a senior manager of multiple branches and a national business development manager in the HVAC industry for over 10 years. Andrew Gray has 10 years experience working for several major HVAC suppliers in Queensland. They will bend over backwards to manage your project and make sure your orders will arrive on time.

staff_website

Airfoil is always competitive on price. We are the largest air diffusion manufacturer in our sector and offer the widest range of products in Australia, therefore we can offer the best prices for small and large customers.

For your next order contact Rob Johnstone, Jeremy Irving and Andrew Gray on (07) 3277 1066 or email salesqld@airfoil.com.au. You can always visit us at the new our branch located at 39 Suscatand Street, Rocklea QLD 4106.

Comments Off on Queensland Branch Now Open News

Read more

Steven Gagliardini joins Airfoil

Airfoil is excited to announce that Steven Gagliardini joins us as Victorian General Manager and Head of TROX/Airfoil. He leads the newly formed branch in Dingley Village Melbourne servicing the whole of Victoria.

Steven will provide support for technical, sales and product design selection for all the consulting engineers, mechanical contractors and architects across Victoria. The branch is a local ‘one stop shop’ supplying Airfoil’s vast range of locally manufactured air diffusion products as well as a distributor for the internationally renowned brand TROX.

Steven has forty years’ experience in the air conditioning sector of the building services industry in Australia and in South Africa. He has held a variety of senior management positions for leading global consulting engineering firms such as Associate Director and Head of Mechanical at AECOM in Perth, Senior Mechanical Engineer at NDY Perth, Office Director and Head of Mechanical at WSP Johannesburg, South Africa and National Manager for ABSA Bank Technical Services Division in Johannesburg, South Africa.

His responsibilities included conceptual design and project management for a variety of commercial, industrial, leisure and domestic projects. Management duties included staff performance, financial control and marketing.

His recent six-year term with TROX Australia as Technical Director included the initial extensive marketing campaign to ensure greater market penetration of the TROX brand in Australia. He provided design proposals and product selections for project specific applications and over the last two years alone advised and made selections on over 250 requests in consultation with distributors, consulting engineers and contractors. A few higher profile projects include WAIMR QEII Perth, Old Treasury Building Perth, Roy Hill Iron Ore, Karratha Quarter and Haliburton Perth.

As Head of TROX/Airfoil, Steven will continue to use his specialist knowledge, experience and passion for air diffusion to provide design proposals and product selections for project specific applications for the TROX and Airfoil product ranges in Victoria, but also across Australia. 

If you have inquiries please contact Steven Gagliardini on 0417 444 890 or email; stevegg(at)airfoil.com.au

Comments Off on Steven Gagliardini joins Airfoil News

Read more